Responds to sudden steam shots. It has a large evaporation surface and steam volume.
Technical Drawing:
Explanations:
1
It is designed and manufactured to meet the needs of industrial facilities such as food, textile, chemical industry and for heating large residential facilities.
2
It can produce between 300 kg/h and 10,000 kg/h capacities.
3
Boilers are fire tubes and tubes are welded to the tubesheet.
4
During design compatible sheet metal is choosed (P235, P265, P295, P355) to stand with high pressures.
5
The boilers are subjected to hydrostatic pressure test which is 1.5 times the operating pressure. However, the working pressure range is between (1-15) bar for our serial production. For higher pressure you can contact with us.
6
Responds to sudden steam shots. It has a large evaporation surface and steam volume.
7
It is manufacutred with corrugated furnace, and puddle tubes sheet.
8
In Solid fuels units there is perfect harmonious between the scotch steam boilers and the front furnaces.
9
In solid fuel boilers; The combustion air fan and chimney fan are full inverter automation.
10
Boiler tubes are high pressure special pipes of drawing seamless steel.
11
It is suitable for solid fuels (coal, pellets …) usage, long life and high efficiency.
12
Solid fuels boilers can be turn into liquid-gas fueled by install burner on it.
13
It balances the heat differences thanks to its design, it shows resistance to high pressure.
14
Due to 3-pass design, the heat transfer to the water increased by increasing the waiting time of flame inside the boiler.
15
The boiler body is painted with heat resistant boiler paint and it is insulated with rock wool.
16
Insulation is covered with colored galvanized sheet or aluminum which provide beautiful appearance.
17
The fuel cap is insulated with fire resistance concrete stand up to 1000° C.
18
The covers are produced as double-walled and heat insulation is minimized by using heat insulation wool between the two walls.
19
The fume escape is prevented by using ceramic wick gaskets on the covers.
20
Welding operations are performed by our certified welders according to WPQR.
21
In order to improve the efficiency of your boiler, you can add an economizer from our products.
22
For high capacity boilers, double furnace can be assembled.
23
Our boilers can be delivered as a complete package with its equipment and automation system.
24
According to your request our company can manufacture your product under control of “Türk Lloydu” or similar independent organizations.
25
For the boilers which is hard to shipping or enterance it to its rooms, on-site manufacturing is carried out at factory standards.
26
It is certified by TS 497 - TS 377 - TS EN 303-5-3-1.
27
It is manufactured in accordance to EN 12953 standards.
28
It has Turkish Standards Institute (TSE) efficiency certificate.
29
It has ISO and CE (2016/426/EU) and (2014/68/EU) certificates.
30
It has 2 years Modelsan warranty.
Front Furnace (Water Tube Boiler) and Stoker System:
1
It burns solid fuels such as lignite, pellet, powder coal (0.5 - 30 mm), hazelnut shell and apricot, olive oil with high efficiency.
2
Since it provides a complete combustion, it starts up the system in a very short time. Environmentally friendly, high efficiency, easy to operate.
3
It is manufactured in order to required capacity and it is easy to installed to boilers.
4
It is the most suitable system for high capacities where the manual loading is difficult.
5
In steam boilers, due to its high performance, it responds to the desired capacity.
6
Less moving parts of the system reduces the systematic problems.
7
Firing pot is manufactured from special steel sheets which is resistant to high temperature.
8
Double pot can be manufactured as required.
Automation System:
1
Boiler feed pump control
2
Water level controlled
3
Stoker controlled
4
Flue gas temperature controlled
5
Steam temperature control
6
Hazard warning light
7
Low water level control
8
High water level control
9
Combustion fan controlled
10
Suction fan controlled
